Publication: Influence of stress-relieving heat treatments on the efficacy of Co-Cr-Mo-W alloy copings fabricated using selective laser melting
0
0
Issued Date
2024-01-01
Resource Type
ISSN
18831958
eISSN
22124632
Scopus ID
2-s2.0-85190312344
Pubmed ID
37438109
Journal Title
Journal of Prosthodontic Research
Volume
68
Issue
2
Start Page
310
End Page
318
Rights Holder(s)
SCOPUS
Bibliographic Citation
Journal of Prosthodontic Research Vol.68 No.2 (2024) , 310-318
Suggested Citation
Htat H.L., Takaichi A., Kajima Y., Kittikundecha N., Kamijo S., Hanawa T., Wakabayashi N. Influence of stress-relieving heat treatments on the efficacy of Co-Cr-Mo-W alloy copings fabricated using selective laser melting. Journal of Prosthodontic Research Vol.68 No.2 (2024) , 310-318. 318. doi:10.2186/jpr.JPR_D_22_00283 Retrieved from: https://hdl.handle.net/20.500.14740/20628
Corresponding Author(s)
Other Contributor(s)
Abstract
Purpose: This study aimed to evaluate the influence of stress-relieving heat treatments on the metal-ceramic bond strength and fitness accuracy of selective laser melting (SLM)-fabricated Co-Cr alloy copings. Methods: SLM-manufactured Co-Cr samples were stress-relieved at 750 (Ht-750) and 1150 °C (Ht-1150). The microstructure, surface roughness, metal-ceramic bond strength, marginal and internal fit, Vickers hardness, and residual stress were then compared with those of the non-heat-treated group (As-built). The results were analyzed using one-way ANOVA and post-hoc tests (Tukey’s or Student’s t test) (P = 0.05). Results: The microstructure of the Ht-1150 samples had a brittle oxide layer and lower surface roughness, resulting in significantly lower bond strength values than those of the other groups. The As-built group exhibited significantly lower marginal gap values than the Ht-750 and Ht-1150 groups. Therefore, the post-heat treatments degraded the marginal fitness. The surface residual stress in all sample groups were compressive because of the sandblasting effect. The compressive stresses were larger in Ht-1150 than in As-built and Ht-750 owing to their low hardness values. Conclusions: Stress-relief annealing porcelain-fused-to-metal single crowns does not improve bond strength and degrades fitness accuracy because additional post-heat treatments induce thermal distortion. These findings are expected to facilitate the direct application of As-built SLM single crowns in dentistry to minimize post-manufacturing costs and time.