Publication: Influence of heat treatment temperature on the properties of the lithium disilicate-fluorcanasite glass-ceramics
0
0
Issued Date
2022
Resource Type
Language
eng
File Type
application/pdf
ISSN
1546542X
Rights Holder(s)
Scopus
Bibliographic Citation
Sustainability (Switzerland). Vol 14, No.11 (2022), p.-
Suggested Citation
Kraipok A., Intawin P., Bintachitt P., Leenakul W., Khamman O., Eitssayeam S., Tunkasiri T., Pengpat K. Influence of heat treatment temperature on the properties of the lithium disilicate-fluorcanasite glass-ceramics. Sustainability (Switzerland). Vol 14, No.11 (2022), p.-. doi:10.1111/ijac.13945 Retrieved from: https://hdl.handle.net/20.500.14740/9463
Abstract
This study aims to investigate the influence of heat treatment temperatures on the mechanical properties and chemical solubility (CS) of lithium disilicate-fluorcanasite glass-ceramics and to develop new dental materials. The glasses and glass-ceramics were prepared using CaF2-SiO2-CaO-K2O-Na2O-Li2O-Al2O3-P2O5-based glass system using a conventional melt quenching method followed by a two-stage crystallization process. This two-stage method involves two heating temperature steps: first at a constant temperature (TS1) of 600°C and second step at varying temperatures (TS2) of 650, 700, 750, and 800°C. The crystallization behavior, phase formation, microstructure, translucency characteristic, density, hardness, fracture strength, and CS were investigated. It was found that the lithium disilicate crystal acted as the main crystalline phase, and the crystalline phase of fluorcanasite occurred at the heat treatment temperatures of 750 and 800°C. In addition, it was found that density, hardness, fracture strength, and CS increased while the translucency values decreased with increasing heat treatment temperatures. Furthermore, the CS increased dramatically when the fluorcanasite phases occurred in the glass-ceramic samples. The maximum density values, Vickers hardness, fracture toughness, and flexural strength are 2.56 g/cm3, 6.73 GPa, 3.38 MPa.m1/2, and 259 MPa, respectively. These results may offer a possibility to design a new material for dental applications based on lithium disilicate-fluorcanasite glass-ceramics. © 2021 The American Ceramic Society.