Please use this identifier to cite or link to this item: https://ir.swu.ac.th/jspui/handle/123456789/29488
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPanmanee P.
dc.contributor.authorOkhawilai M.
dc.contributor.authorMora P.
dc.contributor.authorJubsilp C.
dc.contributor.authorKaragiannidis P.
dc.contributor.authorRimdusit S.
dc.contributor.otherSrinakharinwirot University
dc.date.accessioned2023-11-15T02:08:44Z-
dc.date.available2023-11-15T02:08:44Z-
dc.date.issued2023
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85140909092&doi=10.1016%2fj.polymertesting.2022.107849&partnerID=40&md5=0f13cb30bdb0f6cba4c76dea93d6e909
dc.identifier.urihttps://ir.swu.ac.th/jspui/handle/123456789/29488-
dc.description.abstractA novel material based on silicone rubber (SR) modified with natural rubber (NR) was developed. Combinations of sulfur/peroxide curing systems were used as crosslinking agents. The results showed that the incorporation of NR improved the tensile strength, tear strength and elongation at break of the SR/NR blend. It was also found that the blending of SR/NR at 90/10 provided the greatest tensile strength and elongation at break of 1.9 MPa and 1381%, respectively as well as good tear strength. The properties of this SR/NR blend and the corresponding interpenetrating polymer network (IPN) were compared and showed that the IPN provided higher tensile strength. However, the blend exhibited greater elongation at break and hardness, relatively close to human skin which are more important for a birthing model material. It can be concluded that the blending of SR/NR at 90/10 is the most promising material to substitute expensive currently used birthing model. © 2022 The Authors
dc.publisherElsevier Ltd
dc.subjectNatural rubber
dc.subjectSilicone rubber
dc.subjectSulfur/peroxide curing system
dc.titleDevelopment of a new birthing model material based on silicone rubber/natural rubber blend
dc.typeArticle
dc.rights.holderScopus
dc.identifier.bibliograpycitationPolymer Testing. Vol 117, No. (2023)
dc.identifier.doi10.1016/j.polymertesting.2022.107849
Appears in Collections:Scopus 2023

Files in This Item:
There are no files associated with this item.


Items in SWU repository are protected by copyright, with all rights reserved, unless otherwise indicated.