Please use this identifier to cite or link to this item: https://ir.swu.ac.th/jspui/handle/123456789/17274
Full metadata record
DC FieldValueLanguage
dc.contributor.authorChaiyasarn K.
dc.contributor.authorHussain Q.
dc.contributor.authorJoyklad P.
dc.contributor.authorRodsin K.
dc.date.accessioned2022-03-10T13:16:42Z-
dc.date.available2022-03-10T13:16:42Z-
dc.date.issued2021
dc.identifier.issn22145095
dc.identifier.other2-s2.0-85101210602
dc.identifier.urihttps://ir.swu.ac.th/jspui/handle/123456789/17274-
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85101210602&doi=10.1016%2fj.cscm.2021.e00507&partnerID=40&md5=2d2629cf6cd15d4a3cfc4483cf03503d
dc.description.abstractRecycled aggregate concrete (RAC) is more sustainable, eco-friendly, and cost-effective as compared to natural aggregate concrete (NAC). Among recycled aggregates (RAs), clay brick aggregate (CBA) has the potential of being the most widely used RAs because of the considerable amount of clay brick waste generated in many countries. The compressive behavior and mechanical properties of RAC with CBA are highly influenced by the mechanical properties of bricks. The stiffness and compressive strength of RAC with CBA are reported marginally lower than the natural aggregate concrete (NAC). In the past, different types of fiber reinforced polymer (FRP) composites such as carbon FRP, glass FRP, and aramid FRP have been investigated to enhance the strength and stiffness of the RAC with CBA. However, the behavior of hybrid FRP confined RAC with CBA is not yet clear. In this study, the performance of a new, low-cost and high-performance hybrid composite to enhance the strength and stiffness of the RAC with CBA is investigated. Hybrid composite is developed by using natural Basalt fiber and E-glass fibers (Chopped Strand Mat) along with the use of high-performance polyester resin. Three types of bricks (having different strength and water absorption) were used to produce CBA. Other research parameters included were the strength of RAC with CBA and the number of layers of hybrid basalt/E-glass fiber reinforced polymer (BE-FRP) composite. A total number of 36 concrete cylinders (12 un-confined and 24 confined with BE-FRP) were tested under pure axial compressions. The results indicate that the BE-FRP composites are highly suitable to enhance strength, stiffness, and ductility of the RAC with CBA. Also, there was found a significant increase in strength and ductility with an increase in the confinement level. In the end, the efficiency of existing strength and stain models was assessed to predict the ultimate strength and strain of the BE-FRP confined RAC with BAC. © 2021
dc.languageen
dc.subjectAggregates
dc.subjectBasalt
dc.subjectBrick
dc.subjectCompressive strength
dc.subjectConcrete aggregates
dc.subjectCost effectiveness
dc.subjectDuctility
dc.subjectFiber reinforced plastics
dc.subjectFibers
dc.subjectPolyester resins
dc.subjectRecycling
dc.subjectStiffness
dc.subjectWater absorption
dc.subjectCompressive behavior
dc.subjectFiber reinforced polymer composites
dc.subjectFiber reinforced polymers
dc.subjectNatural aggregate concrete (NAC)
dc.subjectRecycled aggregate concrete
dc.subjectRecycled aggregates
dc.subjectStrength and ductilities
dc.subjectStrength and stiffness
dc.subjectConcretes
dc.titleNew hybrid basalt/E-glass FRP jacketing for enhanced confinement of recycled aggregate concrete with clay brick aggregate
dc.typeArticle
dc.rights.holderScopus
dc.identifier.bibliograpycitationCase Studies in Construction Materials. Vol 14, No. (2021)
dc.identifier.doi10.1016/j.cscm.2021.e00507
Appears in Collections:Scopus 1983-2021

Files in This Item:
There are no files associated with this item.


Items in SWU repository are protected by copyright, with all rights reserved, unless otherwise indicated.