Please use this identifier to cite or link to this item: http://ir.swu.ac.th/jspui/handle/123456789/13380
Title: Effect of sintering columns on the heat transfer and flow characteristics of the liquid cooling vapor chambers
Authors: Naphon P.
Wiriyasart S.
Keywords: Coolants
Fluids
Heat transfer
Mass transfer
Cooling performance
Flow charac-teristics
Heat and mass transfer models
Heat transfer and flows
Liquid cooling
Number and size
Parametric study
Thermal Performance
Sintering
Issue Date: 2016
Abstract: The results of the heat and flow characteristics of working fluid inside the vapor chamber with different sintering columns of 20, 81, 225 are presented. The vapor chambers with one inlet port and four outlet ports are tested by using water as coolant. Parametric studies including different heat fluxes, number and size of wick columns, and flow rate of coolants on the cooling performance are considered. A three-dimensional heat and mass transfer model for vapor chamber with wick and without sintering plate and sintering columns are developed. The numerical simulation results show the velocity and pressure distribution of liquid and vapor phases of the working fluid inside the vapor chamber. It is found that the number of wick column have an important influence to the velocity and pressure phenomena of working fluid which results in thermal performance of vapor chamber. Reasonable agreement is obtained from the comparison between the measured data and the predicted results. © 2015, Springer-Verlag Berlin Heidelberg.
URI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84945264414&doi=10.1007%2fs00231-015-1699-8&partnerID=40&md5=193516532ba2a93ebf94881ec6257d32
http://ir.swu.ac.th/jspui/handle/123456789/13380
ISSN: 9477411
Appears in Collections:Scopus 1983-2021

Files in This Item:
There are no files associated with this item.


Items in SWU repository are protected by copyright, with all rights reserved, unless otherwise indicated.