Please use this identifier to cite or link to this item: https://ir.swu.ac.th/jspui/handle/123456789/27496
ชื่อเรื่อง: Use of Natural and Synthetic Fiber-Reinforced Composites for Punching Shear of Flat Slabs: A Comparative Study
ผู้แต่ง: Joyklad P.
Yooprasertchai E.
Wiwatrojanagul P.
Chaiyasarn K.
Ali N.
Hussain Q.
Keywords: Carbon fiber reinforced plastics
Natural fibers
Reinforcement
Stars
Textile fibers
Aramid fiber reinforced polymers
Carbon fibre reinforced polymer
Double line
Double stars
Fiber-reinforced polymers
Fibre reinforced polymers
วันที่เผยแพร่: 2022
บทคัดย่อ: Over the last two decades, considerable attention has been devoted to the strengthening of sub-standard flat-slab constructions. With the evolution of composite materials and an increasing emphasis on the economical and sustainable use of natural fibers, many researchers have utilized them in the strengthening of flat flabs mitigating punching failures. This study aims at investigating and comparing the behavior of flat slabs strengthened with post-installed composite and natural reinforcements. An experimental program was devised consisting of eight flat-slab specimens. One specimen was tested in as-built condition to provide a reference. The remaining specimens were strengthened with Carbon Fiber-Reinforced Polymer (CFRP), Aramid Fiber-Reinforced Polymer (AFRP), and sisal rods. The pattern of post-installed rods was varied as single line, double line, and star shapes around the column. The results indicated that the single-line pattern could only enhance the maximum sustained load by up to 6% compared to that of the reference specimen. On the contrary, double line and star shape configurations resulted in a substantial increase in the maximum sustained load. An analytical assessment of ACI 318-19 provisions resulted in an over-estimation of the shear strengths of CFRP-and AFRP-strengthened slabs. Furthermore, the same provisions led to lower yields than experimental shear strengths for sisal-strengthened slabs. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
URI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85124693578&doi=10.3390%2fpolym14040719&partnerID=40&md5=330c313fd6ced2619108ab5bd92c0578
https://ir.swu.ac.th/jspui/handle/123456789/27496
ISSN: 20734360
Appears in Collections:Scopus 2022

Files in This Item:
There are no files associated with this item.


Items in SWU repository are protected by copyright, with all rights reserved, unless otherwise indicated.