Please use this identifier to cite or link to this item: https://ir.swu.ac.th/jspui/handle/123456789/15024
Full metadata record
DC FieldValueLanguage
dc.contributor.authorChandra R.
dc.contributor.authorKaur D.
dc.contributor.authorChawla A.K.
dc.contributor.authorPhinichka N.
dc.contributor.authorBarber Z.H.
dc.date.accessioned2021-04-05T04:32:21Z-
dc.date.available2021-04-05T04:32:21Z-
dc.date.issued2006
dc.identifier.issn9215093
dc.identifier.other2-s2.0-33748176481
dc.identifier.urihttps://ir.swu.ac.th/jspui/handle/123456789/15024-
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-33748176481&doi=10.1016%2fj.msea.2005.09.132&partnerID=40&md5=07a06926285976a70aafe03e7fc7cd32
dc.description.abstractNanocomposite thin films of titanium silicon nitride were deposited by sputtering on R-plane sapphire substrates. The effects of silicon addition and negative substrate bias on the texture development of the films were studied systematically by varying the bias voltage in the range -20 to -200 V. The accompanying changes in the microstructure and growth morphology of the phases in these films were investigated in detail using X-ray diffraction and a atomic force microscopy. In addition, the effect of texture on the mechanical properties of the films was also investigated using nanoindentation technique. Pure TiN films deposited without Si exhibit a strong (1 1 1) preferred orientation, while with addition of Si, the orientation of the films changes from (1 1 1) to (2 0 0). Meanwhile the surface morphology of these films changed from a pronounced columnar microstructure to a dense, fine-grained structure. The effect of negative substrate bias voltage applied during deposition also resulted in a similar change of film orientation and microstructure and leads to the increase in hardness of the films from 21 to 40 GPa, respectively. © 2006 Elsevier B.V. All rights reserved.
dc.subjectAtomic force microscopy
dc.subjectCrystal microstructure
dc.subjectDeposition
dc.subjectIndentation
dc.subjectMechanical properties
dc.subjectMorphology
dc.subjectSputtering
dc.subjectSurfaces
dc.subjectTextures
dc.subjectThin films
dc.subjectTitanium compounds
dc.subjectX ray diffraction analysis
dc.subjectGrowth morphology
dc.subjectNanoindentation
dc.subjectSapphire substrates
dc.subjectTitanium silicon nitride
dc.subjectNanostructured materials
dc.subjectAtomic force microscopy
dc.subjectCrystal microstructure
dc.subjectDeposition
dc.subjectIndentation
dc.subjectMechanical properties
dc.subjectMorphology
dc.subjectNanostructured materials
dc.subjectSputtering
dc.subjectSurfaces
dc.subjectTextures
dc.subjectThin films
dc.subjectTitanium compounds
dc.subjectX ray diffraction analysis
dc.titleTexture development in Ti-Si-N nanocomposite thin films
dc.typeArticle
dc.rights.holderScopus
dc.identifier.bibliograpycitationMaterials Science and Engineering A. Vol 423, (2006), p.111-115
dc.identifier.doi10.1016/j.msea.2005.09.132
Appears in Collections:Scopus 1983-2021

Files in This Item:
There are no files associated with this item.


Items in SWU repository are protected by copyright, with all rights reserved, unless otherwise indicated.