Please use this identifier to cite or link to this item: https://ir.swu.ac.th/jspui/handle/123456789/12050
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHemhirun S.
dc.contributor.authorBunyawanichakul P.
dc.date.accessioned2021-04-05T03:01:42Z-
dc.date.available2021-04-05T03:01:42Z-
dc.date.issued2020
dc.identifier.issn19747071
dc.identifier.other2-s2.0-85091739367
dc.identifier.urihttps://ir.swu.ac.th/jspui/handle/123456789/12050-
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85091739367&doi=10.4081%2fjae.2020.1079&partnerID=40&md5=a7329727dd49185124ce4f7a92a66090
dc.description.abstractAfter the harvest, the paddy would contain high and unequal initial moisture content, depending on the season and harvest time. As a result, the dehydration was caused by using the dryer while feeding the paddy grain unequal moisture content, the dryer should be properly adjusted to retain the final moisture content as per the rice mill and storage requirements and low specific energy consumption (SEC) were used for the drying operation per one cycle product. The objective of this paper was to study the paddy drying operation by using a continuous cross-flow dryer at a different initial grain moisture content. The research was divided into two steps, the first step began with the drying operation with levels of the initial moisture content 20.0%wb that involved the adjustment of the parameters of an average hot-air temperature 150°C, the speed rotation of an eccentric set of 11.52 rad s–1, the airflow rate 0.016 m3 s–1, and speed rotation of rotary valve 0.21 rad s–1 (approximately feed rate 36 kg h–1), by the application of these parameters, from the obtained results, it was found that grain moisture content of paddy was reduced from 20.0%wb to. © the Author(s), 2020 Licensee PAGEPress, Italy.
dc.titleEffect of the initial moisture content of the paddy drying operation for the small community
dc.typeArticle
dc.rights.holderScopus
dc.identifier.bibliograpycitationJournal of Agricultural Engineering. Vol 51, No.3 (2020), p.176-183
dc.identifier.doi10.4081/jae.2020.1079
Appears in Collections:Scopus 1983-2021

Files in This Item:
There are no files associated with this item.


Items in SWU repository are protected by copyright, with all rights reserved, unless otherwise indicated.