Please use this identifier to cite or link to this item:
Title: Fill ratio effects on vapor chamber thermal resistance with different configuration structures
Authors: Wiriyasart S.
Naphon P.
Keywords: Heat flux
Charge ratio
Constant heat flux
Constant mass
Cooling section
Material types
Operating power
Vacuum condition
Vapor chamber
Heat resistance
Issue Date: 2018
Abstract: The objective of this research is to present an investigation the thermal resistance of ten vapor chambers with different configuration structures with different working fluid fill ratios. The coolant flows entering the cooling section of the vapor chamber with constant mass flow rate of 0.05 kg/s. The de-ionize water is charged into the vapor space under vacuum condition with the ranging of 20–45% by volume. A 125 kW/m2 constant heat flux is applied at the 40 × 40 mm2 heat source area. It can be seen from experiments that the optimized fill ratio to obtain the minimum thermal resistance of the vapor chamber depends on the operating power, geometries and material types of heat sinks, configuration structures inside the vapor chamber. The results obtained from this study are expected to lead to guidelines that will allow designing vapor chamber with the optimized fill ratio to obtain minimum thermal resistance. © 2018
ISSN: 179310
Appears in Collections:Scopus 1983-2021

Files in This Item:
There are no files associated with this item.

Items in SWU repository are protected by copyright, with all rights reserved, unless otherwise indicated.